Text 1759, 87 rader
Skriven 2012-02-16 23:12:31 av Dariusz Piatkowski
Ärende: Re: New USB host controller drivers: usbhcd181.zip
==========================================================
pa67210007b4f4dd7cd44a1b239435bfa3bc0536ce4357ed1e75eb2f91d098395.newsdawg.com
From: "Dariusz Piatkowski" <dariusz@_NO-SPAM_mnsi.net>

Hi Lars!

Yes, that's what I did. I downgraded my DANIS506 back to the previously used 
version, 1.8.7. The DANIS506 project shows SMP flagged fixes as having been 
rolled into the 1.8.11 I believe, which is why I pursued trying out that level 
of software.

I was able to use 1.8.11 reliably with the 10.179 version of your USB drivers, 
however 10.181 definitely causes a hang for me. I rolled back the USB drivers
to
10.179 and 10.168, and finally 10.162, and they worked fine as well. So for
now,
it's only 10.181 that is causing a problem. I have not gone through attempting 
to narrow it down to any particular driver or the USBD.SYS itself...will try 
this weekend just out of curiosity.

Thanks for the quick response!

-Dariusz


On Thu, 16 Feb 2012 17:45:05 UTC, "Lars Erdmann" <lars.erdmann@arcor.de> wrote:

> No as I would have no clue on how to fix that.
> It's obviously timing related and therefore will most likely happen with
> about any version of the USB drivers, including 10.162, at least
> if you change sequences in config.sys etc.
> The fact that it works with 10.179 is just mere coincidence.
> 
> I seem to remember that there were SMP issues with some
> version of the DANIS506 driver but I don't remember which one.
> You might want to downgrade to an older version of DANIS506.ADD.
> If that fixes your problem then you will have to wait for an updated version
> of DANIS506.ADD.
> 
> Lars
> 
> 
> "Dariusz Piatkowski" <dariusz@_NO-SPAM_mnsi.net> schrieb im Newsbeitrag 
> news:Qg5I6Bo2seGy-pn2-NZJFJ6qryB51@neurobox...
> > Hi Lars,
> >
> >
> > I moved to the 10.181 release from 10.179...on it's own, works great, 
> > tested
> > with my DSLR (which is really the primary way of tasking the USB interface 
> > for
> > heavy volume processing). No problems to report.
> >
> > ...however...
> >
> > I have been watching DANIS506 project and have seen some references to SMP 
> > fixes
> > in place. I obtained a 1.8.11 build of these drivers and upon installing 
> > them
> > (current version that I have been using for quite some time was 1.8.7) I
> > encountered a very strange behavious with the latest 10.181 USB drivers.
> >
> > The symptoms are very similar, if not downright the same as what I was
> > encountering in my attempts to get the 6-core AMD CPU combinations 
> > working.
> > During boot, as the screen switches to GUI, I see CMD window pop up to run 
> > the
> > STARTUP.CMD script, but the system then completely hangs. Only CAD gets me 
> > out
> > of here...switching back to USB 10.179 cures the issue.
> >
> > So...the actual behind-the-scenes root cause may very well be different, 
> > but it
> > appears to produce the same/similar type of a timing related hang.
> >
> > Should I log a ticket for this?
> >
> > Thanks!
> >
> > 
> 


-- 


--- Internet Rex 2.31
 * Origin: NewsGuy - Unlimited Usenet $19.95 (1:261/20.999)