Text 2008, 87 rader
Skriven 2011-12-20 19:52:03 av Dariusz Piatkowski
Ärende: Re: New USB host controller drivers: usbhcd176.zip
==========================================================
pdeeeba982141fdebab0d2588fb8a39545250cfe9bcf9cee2ac53c3e39bc36826.newsdawg.com
From: "Dariusz Piatkowski" <dariusz@_NO-SPAM_mnsi.net>

Hi Lars!

On Thu, 8 Dec 2011 18:34:30 UTC, "Lars Erdmann" <lars.erdmann@arcor.de> wrote:

> Hallo,
> 
> your report is too unspecific.
> 
> Please follow the enclosed readme.txt on where to report bugs. Also:
> 1.) I need to know if UHCI,OHCI and/or EHCI and if it works ok with the 
> original IBM drivers
> 2.) attach output from "pci.exe -D" to bug report (please attach file, don't 
> paste the output !)
> 3.) create trace output (specify the correct major trace code(s) in 
> config.sys) and attach to bug report.
> You do not have to set up a dump partition if you can properly
> boot the system (just remove VBoxDrv.sys for that). Once the system is up, 
> run tracefmt.exe and save an UNFORMATTED trace file.
> 
> Also experiment with using the original USBD.SYS and also by adding/removing 
> the /FS switch from USBxHCD.SYS drivers.
> 
> I need as much info as possible to isoltate the problem.
> 
> Lars
> 
> 
> "Dariusz Piatkowski" <dariusz@_NO-SPAM_mnsi.net> schrieb im Newsbeitrag 
> news:Qg5I6Bo2seGy-pn2-GzEPvEqod0c8@neurobox...
> > Hi Lars!
> >
> > On Wed, 7 Dec 2011 20:02:36 UTC, "Lars Erdmann" <lars.erdmann@arcor.de> 
> > wrote:
> >
> >> I have updated the USB host controller drivers
> >> USBUHCD.SYS,USBOHCD.SYS,USBEHCD.SYS, USBD.SYS
> >> I have now placed these on hobbes.
> >> They will eventually make it into directory:
> >> /pub/os2/system/drivers/misc
> >>
> >> For the zip file, I changed the naming scheme. It will now contain the 
> >> build
> >> level version number of the drivers.
> >>
> >> Lars
> >
> > Thanks once again for the time spent working on this.
> >
> > Previously, I have been stuck on the 10.168 release...as anything beyond 
> > this
> > would cause a TRAP at boot time. With this latest release I am able to 
> > boot
> > completely as long as I remove the VirtualBox driver (VBoxDrv.sys) from my
> > CONFIG.SYS file. Leaving that driver in causes a hang right as the driver
> > message displays on the screen (having done the ALT-F2 hit at boot time to 
> > list
> > stuff being processed).
> >
> > I am running a SMP system, using OS2APIC.PSD driver with /APIC option 
> > here, 4
> > cpu-core configuration.
> >
> > Reading through the README file it sounds like a dump partition can be set 
> > up
> > for a full dump...is there anything else I can do to try to narrow down 
> > the
> > problem I'm seeing?
> >
> > For what it's worth, I also used the supplied USBD.SYS driver as opposed 
> > to
> > relying on the IBM 10.162 version I was previously using. I assume it's OK 
> > to do
> > so? Didn't see anything in the README that touched upon this...
> >
> > Next task: hook up the DSLR and do some xfers of data over that USB 
> > link...

No longer an issue...I've moved on to 177 release because I can finally boot 
with this one. Update posted to the 177 specific thread...

Thanks!

--- Internet Rex 2.31
 * Origin: NewsGuy - Unlimited Usenet $19.95 (1:261/20.999)